Carbide Tipped Rip Blades

Materials Suggested:

  • Hardwood
  • Softwood

Machine Types Suggested:

  • Table Saw
  • Straight Line Rip
  • Gang Rip Saw

Rip saw blades are designed to cut with the grain of hardwoods and softwoods.  A STRAIGHT GRIND (STR) is the fastest way to rip boards and a TCG is best when a “Glue Joint” is required. An ATB grind is recommended for boards with a strong grain pattern. Strong Grain can cause the blade to drift and follow the grain. Our entire line of rip saw blades can be bored and have pin holes added to accommodate many different saws.

Blades with a 2” arbor hole come with a 9/16” pin hole to accommodate Deihl Rip Saws.

Gang rip blades are made with arbor holes, keyways and pin holes to accommodate the Lauderdale Hamilton and Raimann Rip Saws.

 
Carbide Tipped Rip Saw Blades

Carbide Tipped Rip Saw Blades
STANDARD RIP BLADES
PART # DIA TOOTH GRIND PLATE KERF BORE PINHOLE
R824 8″ 24T 20ST 0.085″ 0.125 5/8″  
R924 9″ 24T 20ST 0.085″ 0.125 5/8″  
R1024 10″ 24T 20ST 0.085″ 0.125 5/8″  
R3030 300 30T 20ST 2.2mm 3.2mm 30mm  
R1224 12″ 24T 20ST 0.085″ 0.125 1″  
R1230 12″ 30T 20ST 0.085″ 0.125 1″  
R1236 12″ 36T 20ST 0.085″ 0.125 1″  
R1640 16″ 40T 20ST 0.12″ 0.165 1″  
R1836 18″ 36T 20ST 0.134″ 0.184 1″  
R1836-2 18″ 36T 20ST 0.134″ 0.184 2″ 9/16″
R2040 20″ 40T 20ST 0.134″ 0.184 1″  
HIGH PRODUCTION RIP BLADES
PART# DIA TOOTH GRIND PLATE KERF BORE
HP1224 12″ 24T 20ST 0.11 0.16 1″
HP1230 12″ 30T 20ST 0.134 0.184 1″
HP1430 14″ 30T 20ST 0.134 0.184 1″
HP1640 16″ 40T 20ST 0.134 0.184 1″
HEAVY DUTY RIP BLADES
Ripping of hard and soft woods. Suitable for both hand and power feed applications.
Can be modified for gang ripping applications.
PART # DIA TOOTH GRIND PLATE KERF BORE
HD1010 10″ 10T 20ST 0.095 0.145 5/8″
HD1024 10″ 24T 20ST 0.095 0.145 5/8″
HD1212 12″ 12T 20ST 0.11 0.16 1″
HD1224 12″ 24T 20ST 0.095 0.145 1″
HD1236 12″ 36T 20ST 0.095 0.145 1″
HD1420 14″ 20T 20ST 0.12 0.16 1″
HD1430 14″ 30T 20ST 0.11 0.16 1″
HD1440 14″ 40T 20ST 0.11 0.16 1″
HD1630 16″ 30T 20ST 0.12 0.165 1″
All blades with 2″ bore come standard with 9/16″ pinhale
GLUE LINE RIP BLADES
These are the cleanest cutting rip blades to be used where a “glue joint” is required.
Triple Chip Grind (TCG) is recommended for hardwoods and composite boards and will produce
a “glue joint” cut. Offered in a variety of kerfs and tooth counts to suit many unique requirements.
Other rip blades can be modified to fit your machine.
PART # DIA TOOTH GRIND PLATE KERF BORE PINHOLE
G1024A-125 10″ 24T 20ATB   0.125 5/8″  
G1024A-145 10″ 24T 20ATB 0.095 0.145 5/8″  
G1224A 12″ 24T 20ATB 0.095 0.145 1″  
G1440A 14″ 40T 20ATB 0.11 0.16 1″  
G1030T 10″ 30T 20TCG 0.095 0.145 5/8″  
G1230T 12″ 30T 20TCG 0.11 0.16 1″  
G1236T-160 12″ 36T 20TCG 0.11 0.16 1″  
G1236T-170 12″ 36T 20TCG 0.12 0.17 1″  
G1436T 14″ 36T 20TCG 0.12 0.165 1″  
G1436T-112 14″ 36T 20TCG 0.12 0.165 1.1/2″  
G1436T-2 14″ 36T 20TCG 0.12 0.165 2″ 9/16″
G1440T 14″ 40T 20TCG 0.11 0.16 1″  
G1636T 16″ 36T 20TCG 0.12 0.17 1″  
G1636T-2 16″ 36T 20TCG 0.12 0.17 2″ 9/16″
G1836T 18″ 36T 20TCG 134 0.184 1″  
G1836T-2 18″ 36T 20TCG 134 0.184 2″ 9/16″
ULTRA THIN RIP
Ideal for ripping on under powered saws or moulders. A thinner kerf allows for less feed effort an saves wood! For maximum performance use with saw stabilizers.
PART# DIA TOOTH GRIND PLATE KERF BORE
U824 8″ 24T 20ST 0.06 0.09 5/8″
U1024 10″ 24T 20ATB 0.06 0.09 5/8″
U1224 12″ 24T 20ST 0.06 0.09 1″
GANG RIP BLADES
Blades are designed for Domestic and European multi-rip machines. Offered in a variety of kerfs and tooth counts to suit many unique requirements. Other rip blades can be modified to fit your machine.
PART # DIA TOOTH GRIND PLATE KERF BORE KEYWAYS
GR1030 10″ 30T 20ST .095″ 0.135 70mm 20×10
GR1040T-3 10″ 40T 15TCG 0.085 0.125 3″ 3 pins
GR1040T-4 10″ 40T 15TCG 0.085 0.125 4 3/16″ 3 pins
GR1224-125 12″ 24T 20ST 0.085 0.125 70mmv 20×10
GR1224-145 12″ 24T 20ST 0.095 0.145 70mm 20×10
GR1224-134 12″ 24T 20ST 0.095 0.145 1 3/4″ none
GR1224-318 12″ 24T 20TCG 0.095 0.135 3.1/8″ none
GR1228 12″ 28T 20ST 0.11 0.16 80mm 20x 5
GR1230-134 12″ 30T 20ST 0.134 0.184 1 3/4″ none
GR1236 12″ 36T 20ST 0.095 0.135 3.1/8″ none
GR3070 300 30T 20ST 2.8 4.3 70mm 20×10
GANG RIP BLADES – GLUE LINE RIP
Blades are designed for Domestic European multi -rip machines. Triple Chip Grind (TCG) is
recommended for hard woods and composite boards and will produce a “glue joint” cut.
Offered in a variety of kerfs and tooth counts to suit many unique requirements. Other rip blades
can be modified to suit your machine.
PART # DIA TOOTH GRIND PLATE KERF BORE KEYWAY
GR1040T-318 10″ 40T 15TCG 0.085 0.125 3 1/8″ 1/4″X1/4″
GR1236T-70 12″ 36T 20TCG 0.095 0.135 70mm 20×10
GR1236T-80 12″ 36T 20TCG 0.11 0.16 80mm 20×5 + pins
GR1236T-125 12″ 36T 20TCG 0.85 0.125 3.1/8″ 1/4″x1/4″
GR1236T-160 12″ 36T 20TCG 0.11 0.16 3.1/8″ 1/4″x1/4″
GR1236T-170 12″ 36T 20TCG 0.12 0.17 3.1/8″ 1/4″x1/4″
GR1248T-80 12″ 48T 20TCG 0.11 0.16 80mm 20×5 + pins
GR1436T 14″ 36T 20TCG 0.12 0.176 3.1/8″ 1/4″x1/4″
GR3060 300 36T 20TCG 2.8 4 60mm 20×10
GR3570 350 36T 20TCG 3.2 4.3 70mm 20×10