Machine Types Suggested:
|
Carbide and Cermet Tipped Cold Saw Blades can greatly reduce your production cost and provide fast clean cuts in mild and tough steel solids, pipes and tubes. CNC technology and years of experience can benefit your production needs. Contact us for feed and speed recommendations. These blades should only be operated on specific CNC saws, and are not intended for use on standard low RPM cold saws (see our M-2 HSS cold saw blades).
Cermet Tipped
- Cuts solids
- Carbon steel, alloy steel
- Carbon content less than .45%
Carbide Tipped
- Tubes and solids
- Stainless steel, alloy steel and special purpose steel
- Carbon content greater than .45%
Coated Carbide Tipped
- Tubes and solids
- High carbon steel alloys
- Reduces heat-wear and distortion
Advantages:
- Lower cost per cut
- Wide variety of tooth counts to accommodate your part
- Stiff and extremely flat plates ensure distortion-free accurate cuts
- Increased productivity (less downtime)
- Excellent cut quality
- Predictable performance
ADD ARBOR HOLE DIAMETER TO THE END OF THE PART NUMBER EX. FC36080-40 | |||||||
---|---|---|---|---|---|---|---|
PART # | DIAM. | KERF | BODY | TEETH | ID | ||
FC25054 | 250mm | 2.0 | 1.7 | 54 | 32/40 | ||
FC25060 | 250mm | 2.0 | 1.7 | 60 | 32/40 | ||
FC25072 | 250mm | 2.0 | 1.7 | 72 | 32/40 | ||
FC25080 | 250mm | 2.0 | 1.7 | 80 | 32/40 | ||
FC26076 | 260mm | 2.0 | 1.7 | 76 | 32/40 | ||
FC28554 | 285mm | 2.0 | 1.7 | 54 | 32/40 | ||
FC28560 | 285mm | 2.0 | 1.7 | 60 | 32/40 | ||
FC28572 | 285mm | 2.0 | 1.7 | 72 | 32/40 | ||
FC28580 | 285mm | 2.0 | 1.7 | 80 | 32/40 | ||
FC28590 | 285mm | 2.0 | 1.7 | 90 | 32/40 | ||
FC285100 | 285mm | 2.0 | 1.7 | 100 | 32/40 | ||
FC31580 | 315mm | 2.3 | 2.0 | 80 | 32/40 | ||
FC36060 | 360mm | 2.6 | 2.3 | 60 | 40/50 | ||
FC36080 | 360mm | 2.6 | 2.3 | 80 | 40/50 | ||
FC36010 | 360mm | 2.6 | 2.3 | 100 | 40/50 | ||
FC3612 | 360mm | 2.6 | 2.3 | 120 | 40/50 | ||
FC42060 | 420mm | 2.7 | 2.3 | 60 | 50 | ||
FC42080 | 420mm | 2.7 | 2.3 | 80 | 50 | ||
FC42010 | 420mm | 2.7 | 2.3 | 100 | 50 | ||
FC425550 | 425mm | 2.7 | 2.3 | 50 | 50 | ||
FC42560 | 425mm | 2.7 | 2.3 | 60 | 50 | ||
FC46040 | 460mm | 2.7 | 2.3 | 40 | 40/50 | ||
FC46060 | 460mm | 2.7 | 2.3 | 60 | 40/50 | ||
FC46080 | 460mm | 2.7 | 2.3 | 80 | 40/50 | ||
FC58060 | 580mm | 3.2 | 2.6 | 60 | 50/80 | ||
FC58070 | 580mm | 3.2 | 2.6 | 70 | 50/80 | ||
FC58080 | 580mm | 3.2 | 2.6 | 80 | 50/80 |