FRICTION SAW BLADES
Materials Suggested:
- HOLLOW METAL DOORS
- STEEL TUBES
- FABRICATION
- STRUCTURAL SHAPES
- ANGLE CUTTING
Machine Types Suggested:
- Radial Arm Saws
- Miter Saws
- "Chop" Saws
| Part # | Dia. | Thickness | Std. Teeth | Arbor Hole |
|---|---|---|---|---|
| SMC10332F | 10" | 3/32" | 250/300 | 5/8" |
| SMC1233258F | 12" | 3/32" | 250/300 | 5/8" |
| S123321F | 12" | 3/32" | 250/300 | 1" |
| S1218F | 12" | 1/8" | 250/300 | 1" |
| S1418F | 14" | 1/8" | 250/300 | 1" |
| S1618F | 16" | 1/8" | 250/300 | 1" |
| S1818F | 18" | 1/8" | 300 | 1" |
| S18532F | 18" | 5/32" | 350 | 1" |
| S20532F | 20" | 5/32" | 300/350/400 | 1" |
| S20316F | 20" | 3/16" | 300 | 1" |
| S22532-F | 22" | 5/32" | 400 | 1" |
| S24532-F | 24" | 5/32" | 400 | 1" |
| Metric (mm) | ||||
| Dia. | Thickness | Teeth | ID | |
| F300 | 300 | 2.5/3.0 | 200 | 30/40 |
| F350 | 350 | 2.5/3.0 | 200/220 | 30/40 |
| F400 | 400 | 2.5/3.0/4.0 | 240/300 | 40 |
| F450 | 450 | 3.0/4.0 | 240/300 | 40 |
| F500 | 500 | 3.0/4.0/5.0/6.0 | 300 | 40 |
| F520 | 520 | 3.0/4.0/5.0/6.0 | 300 | 40 |
| F550 | 550 | 3.0/4.0/5.0 / 6.0 | 300 | 40 |
| F560 | 560 | 3.0/4.0 | 300 | 40 |
| F580 | 580 | 4.0/5.0/6.0 | 300 | 40 |
| F600 | 600 | 4.0/5.0/6.0 | 300 | 40/50 |
| F650 | 650 | 4.0/5.0/6.0 | 300 | 40/50 |
| F700 | 700 | 4.0/5.0/6.0/7.0 | 300 | 40/50 |
| F750 | 750 | 5.0/6.0/7.0 | 300/350/400 | 40/50 |
| F850 | 850 | 6.0/7.0/8.0 | 320/350/380 | 40/50 |
| F900 | 900 | 7 | 320/350/400 | 50/80/100 |
| F1000 | 1000 | 7.0/7.5/8.0/10.0 | 320/400/450 | 50/80/100 |
Friction Saws are designed for cutting thin sections of mild steel. Sawing of ferrous metal with this type of blade is done by friction which requires a fine tooth blade, operated at high arbor speed, for use on heavy-duty saws equipped with large motors and clamping fixtures. Since friction blades actually burn through the stock, removing globules of metal rather than chips; some burring of the material may result. However, friction saws are superior to abrasive wheels where finish and cutting life are important. To avoid damaged blades and excessive burring, it is recommended that friction saw blades be changed frequently for sharpening. Friction saw blades are always inspected for flatness, tension, balance and cracks, on both new blades and when serviced. Custom sizes are made to request.
Due to the abusive nature of steel sawing applications, we cannot guarantee our friction saws against cracking.