Email:
info@blademfg.com
Call Toll-Free:
1-800-227-4023
|
Carbide Tipped Combination and Rip Saws for Wood
|
Portable Air Saw | Dado Heads | Groover Saw | Printers Saw | Combination and Rip Saws
|
| TYPE CS (4 TOOTH & RAKER) SMOOTH CUTTING COMBINATION |
 |
This type of saw is designed to be used for the same kind of cutting as the hollow-ground planer blade. It is suitable for ripping, cross-cutting, mitering, and may be used on either radial or table saws. It is not recommended for use on electric hand saws. The Type CS combination saw will give a smooth fast cut in hard or soft woods, ply-wood and veneer |
| DIA. | No. OF TEETH | PLATE GAUGE | KERF | ARBOR HOLE | |
| 8" | 30 | 15 | .115" | 5/8" | |
| 9" | 40 | 14 | .125" | 5/8" | |
| 10" | 40 | 14 | .125" | 5/8" | |
| 12" | 40 | 12 | .150" | 5/8" | |
| 12" | 40 | 12 | .150" | 1" | |
| 14" | 50 | 11 | .165" | 1" | |
| 16" | 60 | 11 | .165" | 1" | |
| 18" | 70 | 10 | .175" | 1" | |
| 20" | 80 | 10 | .175" | 1" | |
|
| | indicates items are stocked, see separate price lists. |
|
| TYPE C C RADIAL SAW COMBINATION |
 | The Type C C combination is designed for use on radial arm saws such as De Walt, Delta, and others. The hook and back clearance of teh teeth are made to reduce vibration and self-feeding, on radial saws. The Type C C combination is ideal for general purpose work where smoothness of cut is not important. May be used for either ripping or cross-cutting. Regularly furnished with alternate bevel teeth and raker. |
| DIA. | No. OF TEETH | PLATE GAUGE | KERF | ARBOR HOLE | |
| 9" | 24 | 14 | .125" | 5/8" | |
| 10" | 24 | 14 | .125" | 5/8" | |
| 12" | 30 | 13 | .130" | 5/8" | |
| 12" | 30 | 13 | .130" | 1" | |
| 14" | 36 | 12 | .150" | 1" | |
| 16" | 42 | 11 | .165" | 1" | |
| 18" | 45 | 10 | .175" | 1" | |
| 20" | 48 | 10 | .175" | 1" | |
|
| | indicates items are stocked, see separate price lists. |
|
CARBIDE TIPPED CIRCULAR SAWS THROUGH 20"
(Above 20" on request) |
| TYPE CA RIP SAWSWHEN RIPPING GREEN HARDWOOD, TOTAL SIDE CLEARANCE SHOULD BE APPROXIMATELY DOUBLE THAT OF STANDARD RIP SAWS. |
 | The Type C A Rip Saw is designed for cutting only with the grain. It is suitable for use on either hand feed or power feed machines. The carbide tips are ground with maximum side clearance to permit fast feeds in either hard or soft wood. Thpe C A Rip Saws are regularly furnished with teeth ground straight across. |
| DIA. | PLATE GA. | KERF | ARBOR HOLE | 24 | 30 | 36 |
| 10" | 12 | .150" | 5/8" | | | |
| 12" | 11 | .165" | 1" | | | |
| 14" | 10 | .175" | 1" | | | |
| 16" | 10 | .175" | 1" | | | |
| 18" | 10 | .175" | 1" | | | |
| 20" | 10 | .175" | 1" | | | |
|
| | indicates items are stocked, see separate price lists. |
|
|
|
EMAIL:info@blademfg.com
THE BLADE MFG. CO. • P.O. BOX 12217
• 909 WEST THIRD AVE.
COLUMBUS, OH 43212 USA
TOLL FREE: 1-800-227-4023 • PH: 1-614-294-1649 • FAX: 1-614-294-8437
|
|