CARBIDE TIPPED SAW BLADES FOR NON-FERROUS METAL
Materials Suggested:
- Aluminum
- Brass
- Copper
- Lead Sheets
- Bar Stock
- Medium-to-hard Plastic
- MDF
- Single-Sided Laminates
- Particle Board
Machine Types Suggested:
- Miter Saw
- Double Miter Saw
- Radial Arm Saw
- Table Saw
- Up-Cut Saws
The Non-Ferrous blade comes with a TCG or LRTCG grind and positive 5 to negative 5 degrees of hook, depending on the application. Heavier plates help support the rigors of cutting non-ferrous metals. Mechanical clamping and lubricant spray are recommended when cutting non-ferrous metal. As a general rule, use more teeth for thin material and fewer teeth for thicker material. Contact our technical sales team to assist in choosing the correct blade for your job.
| PART # | DIAM. | TEETH | HOOK | GRIND | ID | PLATE | KERF | |
|---|---|---|---|---|---|---|---|---|
| AS378203 | 3-7/8" | 20 | 5 | TC2 | 3/8" | .110" | .135" | |
| AS378245 | 3-7/8" | 24 | 5 | TC2 | 5/8" | .110" | .135" | |
| AS412T | 4" | 12 | 5 | TCG | 3/4" | .085" | .125" | |
| AS420T | 4" | 20 | 5 | TCG | 3/4" | .075" | .105" | |
| AS4207T | 4" | 20 | 0 | TC2 | 7/8" | .095" | .150" | |
| AS424T | 4" | 24 | 0 | TCG | 3/4" | .075" | .105" | |
| AS4247T | 4" | 24 | -2 | TC2 | 7/8" | .085" | .110" | |
| NF74N | 7" | 40 | -5 | TCG | 5/8" | .085" | .115" | |
| NF71424 | 7-1/4" | 24 | 0 | TCG | 5/8" K | .070" | .095" | |
| NF71440 | 7-1/4" | 40 | 0 | TCG | 5/8" K | .070" | .110" | |
| NF71460 | 7-1/4" | 60 | 0 | TCG | 5/8" K | .070" | .095" | |
| NF840 | 8" | 40 | 5 | TCG | 5/8" K | .070" | .095" | |
| NF860C | 8" | 60 | 0 | TCG | 5/8" K | .070" | .095" | |
| NF860 | 8" | 60 | 0 | TCG | 5/8" | .085" | .115" | |
| NF86N | 8" | 60 | -5 | TCG | 5/8" | .085" | .115" | |
| NF88N | 8" | 80 | -2 | TCG | 5/8" | .085" | .115" | |
| P860T | 8-1/4" | 60 | 0 | TCG | 5/8" | .070" | .095" | |
| P826T | 8-1/2" | 60 | 0 | TCG | 5/8" | .070" | .095" | |
| P86NT | 8-1/2" | 60 | -5 | TCG | 5/8" | .059" | .090" | |
| NF960 | 9" | 60 | 0 | TCG | 5/8" | .085" | .115" | |
| NF1040 | 10" | 40 | 0 | TCG | 5/8" | .085" | .115" | |
| P1060T | 10" | 60 | 0 | TCG | 5/8" | .059" | .090" | |
| NF1060 | 10" | 60 | 0 | TCG | 5/8" | .085" | .125" | |
| NF106N | 10" | 60 | -5 | TCG | 5/8" | .085" | .125" | |
| P1080T | 10" | 80 | 0 | TCG | 5/8" | .059" | .090" | |
| P108NT | 10" | 80 | -5 | TCG | 5/8" | .059" | .090" | |
| NF1080 | 10" | 80 | 0 | TCG | 5/8" | .085" | .125" | |
| NF108N | 10" | 80 | -5 | TCG | 5/8" | .085" | .125" | |
| MN1090 | 10" | 90 | -5 | LRTC | 5/8" | .095" | .125" | |
| P1010T | 10" | 100 | 0 | TCG | 5/8" | .059" | .090" | |
| NF1010 | 10" | 100 | 0 | TCG | 5/8" | .095" | .125" | |
| NF101N | 10" | 100 | -5 | TCG | 5/8" | .095" | .125" | |
| NF1020 | 10" | 120 | -2 | TCG | 5/8" | .085" | .115" | |
| P126NT | 12" | 60 | -5 | TCG | 1" | .085" | .115" | |
| NF1260 | 12" | 60 | 0 | TCG | 1" | .095" | .125" | |
| P1272T | 12" | 72 | 0 | TCG | 1" | .085" | .115" | |
| P1280T | 12" | 80 | 0 | TCG | 1" | .059" | .090" | |
| DM1280T | 12" | 80 | 0 | TCG | 5/8" | .095" | .125" | |
| NF1280 | 12" | 80 | 0 | TCG | 1" | .095" | .125" | |
| NF128N | 12" | 80 | -5 | TCG | 1" | .095" | .125" | |
| MN1290 | 12" | 90 | -5 | LRTC | 1" | .110" | .135" | |
| P1210T | 12" | 100 | 0 | TCG | 1" | .059" | .090" | |
| DM1210T | 12" | 100 | 0 | TCG | 5/8" | .095" | .125" | |
| NF1210 | 12" | 100 | 0 | TCG | 1" | .095" | .125" | |
| NF121N | 12" | 100 | -5 | TCG | 1" | .095" | .125" | |
| DM1210M | 12" | 102 | 0 | LRTC | 5/8" | .100" | .125" | |
| DM122N | 12" | 120 | -2 | TCG | 5/8" | .100" | .125" | |
| NF122N | 12" | 120 | -2 | TCG | 1" | .095" | .125" | |
| MN1212 | 12" | 120 | -2 | LRTC | 1" | .095" | .125" | |
| NF1440 | 14" | 40 | 0 | TCG | 1" | .110" | .160" | |
| NF1460 | 14" | 60 | 0 | TCG | 1" | .120" | .150" | |
| P1480T | 14" | 80 | 0 | TCG | 1" | .070" | .102" | |
| P148NT | 14" | 80 | -5 | TCG | 1" | .085" | .120" | |
| NF1480-30 | 14" | 80 | 0 | TCG | 30mm | .098" | .138" | |
| NF1480-138 | 14" | 80 | 0 | TCG | 1" | .098" | .138" | |
| NF1480 | 14" | 80 | 0 | TCG | 1" | .120" | .150" | |
| NF148N | 14" | 80 | -5 | TCG | 1" | .120" | .150" | |
| P1410T | 14" | 100 | 0 | TCG | 1" | .070" | .102" | |
| P141NT | 14" | 100 | -5 | TCG | 1" | .085" | .120" | |
| NF1410-138 | 14" | 100 | 0 | TCG | 1" | .098" | .138" | |
| NF1410 | 14" | 100 | 0 | TCG | 1" | .120" | .150" | |
| NF141N-138 | 14" | 100 | -5 | TCG | 1" | .098" | .138" | |
| NF141N | 14" | 100 | -5 | TCG | 1" | .120" | .150" | |
| DM142N | 14" | 120 | -5 | TCG | 5/8" | .110" | .140" | |
| NF1412 | 14" | 120 | 0 | TCG | 1" | .110" | .150" | |
| NF142N | 14" | 120 | -5 | TCG | 1" | .110" | .140" | |
| MN1412 | 14" | 120 | -5 | LRTC | 1" | .134" | .165" | |
| NF1580 | 15" | 80 | 0 | TCG | 1" | .120" | .160" | |
| P151NT | 15" | 100 | -5 | TCG | 1" | .095" | .125" | |
| NF1510 | 15" | 100 | 0 | TCG | 1" | .110" | .150" | |
| NF1512 | 15" | 120 | 0 | TCG | 5/8" | .110" | .150" | |
| NF1660 | 16" | 60 | 0 | TCG | 1" | .120" | .165" | |
| NF1660-205 | 16" | 60 | 0 | TCG | 1" | .150" | .205" | |
| NF166N | 16" | 60 | -5 | TCG | 1" | .134" | .173" | |
| NF1680 | 16" | 80 | 0 | TCG | 1" | .120" | .150" | |
| NF1680-200 | 16" | 80 | 0 | TCG | 1" | .150" | .200" | |
| NF168N | 16" | 80 | -5 | TCG | 1" | .134" | .174" | |
| NF1610 | 16" | 100 | 0 | TCG | 1" | .120" | .150" | |
| NF161N | 16" | 100 | -5 | TCG | 1" | .134" | .174" | |
| NF1620 | 16" | 120 | 0 | TCG | 1" | .120" | .150" | |
| NF162N | 16" | 120 | -5 | TCG | 1" | .120" | .150" | |
| NF1630 | 16" | 130 | -5 | TCG | 30mm | .115" | .145" | |
| NF1836 | 18" | 36 | 0 | TCG | 1" | .150" | .205" | |
| NF1860 | 18" | 60 | 0 | TCG | 1" | .150" | .200" | |
| NF1872 | 18" | 72 | 0 | TCG | 1-1/2" | .142" | .176" | ms |
| NF1880 | 18" | 80 | 0 | TCG | 1" | .134" | .174" | |
| NF188N | 18" | 80 | -5 | TCG | 1" | .150" | .200" | |
| NF1810 | 18" | 100 | 0 | TCG | 1" | .134" | .174" | |
| NF1812 | 18" | 120 | 0 | TCG | 1" | .134" | .174" | |
| NF182N | 18" | 120 | -5 | TCG | 1" | .134" | .174" | |
| NF1840 | 18" | 140 | -5 | TCG | 1" | .115" | .145" | |
| NF1840-30 | 18" | 140 | -5 | TCG | 30mm | .115" | .145" | |
| NF2060 | 20" | 60 | 5 | TCG | 1" | .134" | .184" | |
| NF2080 | 20" | 80 | 0 | TCG | 1" | .145" | .195" | |
| NF2010 | 20" | 100 | 0 | TCG | 1" | .134" | .174" | |
| NF201N | 20" | 100 | -5 | TCG | 1" | .134" | .174" | |
| NF2020 | 20" | 120 | 0 | TCG | 1" | .134" | .174" | |
| NF202N | 20" | 120 | -5 | TCG | 1" | .134" | .174" | |
| NF2014 | 20" | 140 | -5 | TCG | 1" | .134" | .174" | |
| NF2015 | 20" | 150 | -5 | TCG | 1" | .134" | .164" | |
| NF2260 | 22" | 60 | 5 | TCG | 1-1/2" | .150" | .180" | ms |
| NF2210 | 22" | 100 | -5 | TCG | 1" | .150" | .180" | |
| NF2212 | 22" | 120 | -5 | TCG | 1" | .150" | .180" | |
| NF2215 | 22" | 150 | -5 | TCG | 1" | .150" | .200" | |
| NF2460 | 24" | 60 | 5 | TCG | 1-1/2" | .165" | .205" | ms |
| NF2472 | 24" | 72 | 5 | TCG | 1" | .165" | .205" | |
| NF2472M | 24" | 72 | 5 | TCG | 1-1/2" | .165" | .205" | ms |
| NF2480 | 24" | 80 | -5 | TCG | 1" | .165" | .205" | |
| NF2410 | 24" | 100 | -5 | TCG | 1" | .165" | .205" | |
| NF2412 | 24" | 120 | -5 | TCG | 1" | .165" | .205" | |
| NF2415 | 24" | 150 | -5 | TCG | 1" | .150" | .210" | |
| NF2416 | 24" | 160 | -5 | TCG | 1" | .150" | .210" | |
| NF2416-30 | 24" | 160 | -5 | TCG | 30mm | .150" | .210" | |
| ms-Indicates blades made for Metalsaw plate saws | ||||||||
Metric Sizes
| PART # | DIAM. | TEETH | HOOK | GRIND | ID | PLATE | KERF | |
|---|---|---|---|---|---|---|---|---|
| DM275-80T | 275 | 80T | 5 | TCG | 32mm | 2.5 | 3.2 | |
| NF2890-32 | 280 | 90T | 5 | TCG | 32mm | 2.4 | 3.2 | |
| NF3072-32 | 300 | 72T | 0 | TCG | 32mm | 2.2 | 2.9 | |
| NF3080-40 | 300 | 80T | 0 | TCG | 40mm | 2.5 | 3.2 | |
| NF3390 | 330 | 90T | 5 | TCG | 32mm | 2.8 | 3.7 | |
| NF3560-32 | 350 | 60T | 0 | TCG | 32mm | 3.2 | 4 | |
| NF3580 | 350 | 80T | 0 | TCG | 30mm | 2.5 | 3.5 | |
| NF3580-32 | 350 | 80T | 0 | TCG | 32mm | 2.5 | 3.5 | |
| NF3580-40 | 350 | 80T | 0 | TCG | 40mm | 2.5 | 3.5 | |
| NF3510 | 350 | 100T | 0 | TCG | 32mm | 2.5 | 3.5 | |
| NF3512 | 350 | 120T | 0 | TCG | 1" | .110" | .140" | |
| NF3512-32 | 350 | 120T | -5 | TCG | 32mm | 2.4 | 3.2 | |
| NF3811 | 380 | 110T | -5 | TCG | 32mm | 3 | 3.8 | |
| NF4040 | 400 | 40T | 5 | TCG | 50mm | 2.5 | 3.5 | |
| NF4060 | 400 | 60T | 5 | TCG | 50mm | 2.5 | 3.5 | |
| NF4096-30 | 400 | 96T | 0 | TCG | 30mm | 3.2 | 3.8 | |
| NF4096-32 | 400 | 96T | 0 | TCG | 32mm | 3 | 4 | |
| NF4096-50 | 400 | 96T | 0 | TCG | 50mm | 2.8 | 3.8 | |
| NF4012-32 | 400 | 120T | 0 | TCG | 32mm | 3 | 4 | |
| NF4296 | 420 | 96T | 0 | TCG | 30mm | 3.2 | 4.4 | |
| NF4510-50 | 450 | 100T | 5 | TCG | 50mm | 3.4 | 4.4 | |
| NF4510-32 | 450 | 108T | 5 | TCG | 32mm | 3 | 4 | |
| NF420 | 420 | 120T | 0 | TCG | 30mm | 3.4 | 4.4 | |
| NF5020 | 500 | 120T | 0 | TCG | 30mm | 3.4 | 4.4 | |
| NF5512 | 550 | 120T | -5 | TCG | 30mm | 3.8 | 5 | |
| 40mm bore blades have pinhole pattern: 4/12/64 & 2/8/55 | ||||||||
| 50mm bore blades have pinhole pattern: 4/15/80 | ||||||||