CARBIDE TIPPED PANEL (BEAM) SAW BLADES
Materials Suggested:
- MDF
- Particle Board
- Laminates
- bonded sheets
- Plywood
- Acrylic Sheets (cast and extruded)
Machine Types Suggested:
- Panel sizing saws (Beam Saws)®
- Holzma
- Altendorf
- Shelling
- Selco
- Gabbiani
- Giben
- Mayer
- Scheer
- SCM
- SCMI, etc…
Panel Saw Blades are manufactured to extremely strict tolerances to accommodate optimum performance when used on European panel sizing saws. C-4 micro-grain carbide tips are used to prevent corrosion, which is associated with cutting press board material. The ATB grind is recommended for veneered particle board, raw MDF panels, fiberboard and high density plywood sheets or stacks. The TCG grind is recommended for plastic laminated panels and plywood single sheets and stacks. Keep panel saw blades sharp to prevent blade wear, machine wear and poor cut performance.
| PART # | DIA | TEETH | GRIND | PLATE | KERF | BORE | MACHINE |
|---|---|---|---|---|---|---|---|
| M2264T | 220 | 64T | 5TCG | .083" | .120" | 30mm | Holzher |
| M2264NA | 220 | 64T | N5ATB | .083" | .120" | 30mm | Holzher |
| M2264NT | 220 | 64T | N5TCG | .083" | .120" | 30mm | Holzher |
| LR220 | 220 | 64T | N5LRCR | 2.1 | 3.1 | 30mm | Holzher |
| M2560T | 250 | 60T | 5TCG | 2.2 | 3.2 | 30mm | Striebeg Compact |
| M2580T | 250 | 80T | 5TCG | 2.2 | 3.2 | 30mm | Striebeg Compact |
| LR250 | 250 | 80T | N5LRCR | 2.2 | 2.9 | 30mm | Striebeg Compact |
| M3060A | 300 | 60T | 5ATB | 2.2 | 3.2 | 30mm | |
| M3060T | 300 | 60T | 10TCG | 3.2 | 4.4 | 30mm | Mayer, SCM |
| M3072A | 300 | 72T | 10ATB | 2.2 | 3.2 | 30mm | Altendorf/Sliding table..LXT |
| M3072T | 300 | 72T | 10TCG | 2.2 | 3.2 | 30mm | Altendorf/Sliding table..LXT |
| LX3072 | 300 | 72T | 10TCG | 2.2 | 3.2 | 30mm | Altendorf/Sliding table..LXT |
| M3072T-65 | 300 | 72T | 10TCG | 3.2 | 4.4 | 65mm | Selco EB70 |
| M3072T-75 | 300 | 72T | 10TCG | 3.2 | 4.4 | 75mm | Giben |
| M3072T-80 | 300 | 72T | 10TCG | 3.2 | 4.4 | 80mm | SCM Sigma 65 |
| M3072NT | 300 | 72T | N5TCG | 2.2 | 3.2 | 30mm | Striebeg / Vertical Panel Saws |
| M3080-114 | 300 | 80T | 10TCG | 3.2 | 4.4 | 1.1/4" | |
| LR3072 | 300 | 72T | N5LRCR | 2.2 | 3.2 | 30mm | |
| M3096NT | 300 | 96T | N5TCG | 2.5 | 3.3 | 30mm | Striebeg |
| LR3096 | 300 | 96T | N5LRCR | 2.4 | 3.2 | 30mm | Striebeg |
| M3272T-50 | 320 | 72T | 12TCG | 3.2 | 4.4 | 50mm | Giben |
| M3560T | 350 | 60T | 10TCG | 3.2 | 4.4 | 80mm | Gabbiani, SCM |
| M3572T-30 | 350 | 72T | 10TCG | 3.2 | 4.4 | 30mm | |
| M3572T-114 | 350 | 72T | 12TCG | 3.2 | 4.4 | 1.25" | SCM |
| M3596T | 350 | 96T | 5TCG | 3.4 | 4.4 | 30mm | |
| M35560T | 350 | 60T | 12TCG | 3.2 | 4.4 | 75mm | Giben |
| M35572T | 350 | 72T | 12TCG | 3.2 | 4.4 | 75mm | Giben |
| M3772T | 370 | 72T | 12TCG | 3.2 | 4.4 | 30mm | Schelling |
| M3872T | 380 | 72T | 10TCG | 3.2 | 4.8 | 60mm | Holzma |
| M4060T-80 | 400 | 60T | 10TCG | 3.2 | 4.4 | 80mm | Gabbiani, SCM |
| M4072T-60 | 400 | 72T | 10TCG | 3.2 | 4.4 | 60mm | Holzma |
| M4072T-30 | 400 | 72T | 12TCG | 3.2 | 4.4 | 30mm | Schelling |
| M4072T-75 | 400 | 72T | 12TCG | 3.2 | 4.4 | 75mm | Giben |
| M4072T-80S | 400 | 72T | 12TCG | 3.2 | 4.4 | 80mm | Selco |
| M4072T-80G | 400 | 72T | 12TCG | 3.2 | 4.4 | 80mm | Gabbiani, SCM |
| M4372T-8 | 430 | 72T | 10TCG | 3.2 | 4.4 | 80mm | Selco |
| M4396T | 430 | 96T | 10CG | 3.2 | 4.4 | 75mm | Giben |
| M4572T-60 | 450 | 72T | 12TCG | 3.2 | 4.4 | 60mm | |
| M4572T-75 | 450 | 72T | 12TCG | 3.2 | 4.4 | 75mm | Giben |
| M4572T-80 | 450 | 72T | 12TCG | 3.2 | 4.4 | 80mm | Selco |
| M5060T-75 | 500 | 60T | 12TCG | 3.4 | 4.8 | 75mm | Giben |
| M5060T-60 | 500 | 60T | 12TCG | 3.4 | 4.8 | 60mm | Holzma |
| M5072T-75 | 500 | 72T | 12TCG | 3.4 | 4.8 | 75mm | Giben |
| M5072T-60 | 500 | 72T | 12TCG | 3.4 | 4.8 | 60mm | Holzma |
| M5772T-60 | 520 | 72T | 12TCG | 3.4 | 4.8 | 60mm | Holzma |
| M5760A | 570 | 60T | 19ATB | 3.5 | 4.5 | 60mm | Holzma |