Carbide and Cermet Tipped Saw Blades

Machine Types Suggested:

  • CNC Cold Saws
  • Nishijima
  • Amada
  • Tsune
  • Kasto/Wagner
  • Noritake
  • Kaltenbach

Materials Suggested:

  • Mild Low Carbon Steel
  • Stainless Steel
  • High Carbon Steel
  • Solids and Pipe
Disposable Cold Saw 150x150 Carbide and Cermet Tipped Saw Blades

Disposable Cold Saw Blades

Carbide and Cermet Tipped Cold Saw Blades can greatly reduce your production cost and provide fast clean cuts in mild and tough steel solids, pipes and tubes.  CNC technology and years of experience can benefit your production needs.  Contact us for feed and speed recommendations. These blades should only be operated on specific CNC saws, and are not intended for use on standard low RPM cold saws (see our M-2 HSS cold saw blades).

Cermet Tipped

  • Cuts solids
  • Carbon steel, alloy steel
  • Carbon content less than .45%

Carbide Tipped

  • Tubes and solids
  • Stainless steel, alloy steel and special purpose steel
  • Carbon content greater than .45%

Coated Carbide Tipped

  • Tubes and solids
  • High carbon steel alloys
  • Reduces heat-wear and distortion
 bladecutcolddispose Carbide and Cermet Tipped Saw Blades

Advantages:

  • Lower cost per cut
  • Wide variety of tooth counts to accommodate your part
  • Stiff and extremely flat plates ensure distortion-free accurate cuts
  • Increased productivity (less downtime)
  • Excellent cut quality
  • Predictable performance
PART # DIAM. KERF BODY TEETH ID
CC2554 250mm 2.0″ 1.7 54 32/40
CC2560 250mm 2.0″ 1.7 60 32/40
CC2572 250mm 2.0″ 1.7 72 32/40
CC2580 250mm 2.0″ 1.7 80 32/40
CC2676 260mm 2.0″ 1.7 76 32/40
CC2854 285mm 2.0″ 1.7 54 32/40
CC2860 285mm 2.0″ 1.7 60 32/40
CC2872 285mm 2.0″ 1.7 72 32/40
CC2880 285mm 2.0″ 1.7 80 32/40
CC2890 285mm 2.0″ 1.7 90 32/40
CC28100 285mm 2.0″ 1.7 100 32/40
CC3180 315mm 2.3″ 2.0 80 32/40
CC3660 360mm 2.6″ 2.3 60 40/50
CC3680 360mm 2.6″ 2.3 80 40/50
CC3610 360mm 2.6″ 2.3 100 40/50
CC3612 360mm 2.6″ 2.3 120 40/50
CC4260 420mm 2.7″ 2.3 60 50
CC4280 420mm 2.7″ 2.3 80 50
CC4210 420mm 2.7″ 2.3 100 50
CC42550 425mm 2.7″ 2.3 50 50
CC42560 425mm 2.7″ 2.3 60 50
CC4640 460mm 2.7″ 2.3 40 40/50
CC4660 460mm 2.7″ 2.3 60 40/50
CC4680 460mm 2.7″ 2.3 80 40/50
CC5860 580mm 3.2″ 2.6 60 50/80
CC5870 580mm 3.2″ 2.6 70 50/80
CC5880 580mm 3.2″ 2.6 80 50/80

Comments are closed.